Self-proportioning machine is a new type of ultra-fine classifier developed by our company, and is the perfect combination of inertial grading technology and centrifugal grading technology. Jet Mill makes a complete set of crushing systems.
After the compressed air is dried, it is sprayed into the pulverizing cavity through the Raval nozzle, and the material is repeatedly collided with the intersection of the multi-shaped high-pressure airflow. The crushing material is moved by the rising airflow to the grading area under the fan pulleys. Under the powerful centrifugal force generated by high-speed rotation, the crude material is separated, and the fine particles that meet the particle size requirements are entered into the cyclone separator and The dust collector is collected, and the crude particles drops to the pulverized region to continue to be pulverized.
Flat airflow mill is simple, easy to manufacture due to flat air flow milling, easy to manufacture, so it is widely used.
Structure: Mainly composed of a crushing chamber, a nozzle port, a discharge opening, a gas flow outlet, a compressed air inlet, a grading area, and the like.
Working principle: Transform the compressed air or overheating steam into a high-speed airflow through the nozzle, when the material is sent to the pulverizing chamber by the feeder, a strong impact and dramatic friction make the material are pulverized Become a super fine product.The core technology has reached a good level, and its technical performance is a qualitative leap than the turbine classifier.
1. Low energy consumption: With the same processing capability, energy consumption is reduced by 50% compared to other levels and vertical classifiers.
2. High efficiency: The same processing power, the grading efficiency is 50% higher than other horizontal, and the vertical classifier has increased by 50%.3. High-precision: High classification fineness, completely eliminate excessive particles and sieve slag in the product.
4. Low speed: In the case of the same particle size, the classifier is 50% lower than the other level and the vertical classifier. When producing Moglice hardness5. High output: The host output can reach 50t / h. Complete structure: Special hierarchy can be configured according to different special requirements.
6. A closure or open system can be combined with a ball mill, a Raymond mill, an Impact Mill, a gas flow mill and other milling equipment.
7. Negative pressure production, no dust pollution, and the environment is good. <5时，车轮无磨损，当生产莫氏硬度≥7的粉末时，分级轮的使用寿命是其他水平和垂直粉末的5倍。
8. High degree of automation, strong stability, convenient operation.
