About the content of the top of Jet Mill manufacturers is that their product quality is good, this is also the topic of the old talk. With the development and changes in the times, more and more manufacturers have invested in the sector of Jet Mill, making many manufacturers inch, even stagnation, if these manufacturers pay attention to quality, will not be at least Will stagnate.
In the eyes of many purchases, it is important to buy things that must be cheap and affordable. After the fluidized bed pulverizer compresses, after filtration, after drying, the fluidized ultrasonic air flow is introduced through the nozzle, so that the material is fluidized, and the accelerated material is integrated in several nozzles. The collision, friction, and cut the microcarriers of the particles. After the pulverized material is conveyed into the impeller grading area, under the action of the graded wheel effort and fan effort, the coarse powder is separated, and the coarse powder returns to the crushing chamber according to its own gravity, and the qualified fine powder is Airflow enters the cyclone, fine dust is collected by the bag dust collector, and the purified gas is discharged from the air. But now many manufacturers only pay attention to their own machines can not sell, do not pay attention to their machine quality, and customers don't like it. Most of the manufacturers will pay attention to where they don't sell it. There are now many people like to buy a brand, look affordable and think that the machine's service life will be very long, but now a lot of Jet Mill manufacturers do not pay attention to their own quality, but they are very paying attention to their brand effect, spend a lot of money. Go to advertising, Ignore the quality, the brand effect, the consumer bought the product, I used it for a few days, it is broken, the customer is not happy, will never buy this manufacturer's Jet Mill, then The big price of the merchant is also playing the water.
Here we have repeatedly talked about quality issues, the above is how important the quality of the product, appeals to more Jet Mill manufacturers to do their own products, must first do the quality of the product . The ceramic lining pipe is made of high-tech production process - self-provisional high temperature clutch synthesis method. The tube consists of three layers of corundum ceramics, transition layer, and steel from the inside, and the ceramic layer is formed to form a high temperature of 2200 ° C or higher.The corundum (Al2O3) is a firm bond to the steel pipe through the transition layer.
