There are many types of crushers on the market, mostly short-lived, only a few have gradually recognized in the market, slowly lead and develop with society.
Flat airflow mill is simple, easy to manufacture due to flat air flow milling, easy to manufacture, so it is widely used.
Structure: Mainly composed of a crushing chamber, a nozzle port, a discharge opening, a gas flow outlet, a compressed air inlet, a grading area, and the like.
Working principle: Transform the compressed air or overheating steam into a high-speed airflow through the nozzle, when the material is sent to the pulverizing chamber by the feeder, a strong impact and dramatic friction make the material are pulverized Become a super fine product.
The ceramic lining pipe is made of high-tech production process - self-provisional high temperature clutch synthesis method. The tube consists of three layers of corundum ceramics, transition layer, and steel from the inner to the outside, and the ceramic layer is formed in a high temperature of 2,200 ° C (Al2O3) to form a strong bond through the transition layer with the steel pipe.
The degree of pulverization and fineness of the pulverizer are related to the performance of the equipment.
The better the performance of air flow mill, the higher the degree of crushing. It can not only cut off feed, but also crops such as corn, which is commonly used in rural areas. However, with the continuous extension of the equipment usage and sometimes high voltage operation, the damage to the device is getting more serious. At this time, the crushing effect will drop, and the device will need to start many times to run. Under the conditions such as power supply, the device is required to ensure that the equipment can operate normally and will not be damaged in large area.
First check the power outlet, plug and current line of the device to see if there is a fall off and disconnect, if not, insert the currently running device, the power is first turned on, but when the rotor is manually opened Run again, which means that one of the two start capacitors has been damaged. At this time, only the new capacitive components that are air flowing can be replaced. In most cases, it is a capacitor to fail to fail, so everyone needs to know it.
