Jet Mill is currently one of the indispensable machines of the mechanical industry. It is also a part of the pharmaceutical process than in the pharmaceutical process. - is also an indispensable part, while pulverizing equipment is also an important position .
After the fluidized bed pulverizer compresses, after filtration, after drying, the fluidized ultrasonic air flow is introduced through the nozzle, so that the material is fluidized, and the accelerated material is integrated in several nozzles. The collision, friction, and cut the microcarriers of the particles. After the pulverized material is conveyed into the impeller grading area, under the action of the graded wheel effort and fan effort, the coarse powder is separated, and the coarse powder returns to the crushing chamber according to its own gravity, and the qualified fine powder is Airflow enters the cyclone, fine dust is collected by the bag dust collector, and the purified gas is discharged from the air.
The ceramic lining pipe is made of high-tech production process - self-provisional high temperature clutch synthesis method.
The tube consists of three layers of corundum ceramics, transition layer, and steel from the inner to the outside, and the ceramic layer is formed in a high temperature of 2,200 ° C (Al2O3) to form a strong bond through the transition layer with the steel pipe. Jet Mill is a mechanical machine in the pulverizer used in the pharmaceutical community, which is mainly made by high pressure airflow, and Jet Mill is not contaminated in the production process, and its noise vibration The frequency is also relatively small, and the pharmaceutical industry has been rapidly developed, and it is welcomed by them.
After the after-sales personnel have been examined, there is no problem with the sales of the factory selling, after the inquiry and understanding, there will be some problems, there are some customers reflect It is a new pulverizer to get a problem in the factory.
According to these issues, we will find that every Jet Mill is checked before use, not directly to turn on the power. See what problems do not have problems with his appearance and individual components, and determine if there is no damage, work.
Actually, not just Jet Mill is going to check, no matter what customers need to check after the customer receives the device, it is determined that there is no problem, when the operation, the operation is going to work.
