Ultrafine pulverizer is generally used in industrial, machinery and other industries. Since the long-term labor, it has made a certain life of the ultrafine pulverizer, even if it is improper operation or feed The problem is easy to affect the use of the pulverizer, where we introduce the maintenance focus in the use of ultrafine crushers, and hope to help you when using the crusher.
1, the crusher motor has been seal before the factory, the coupling has been corrected, please do not loosen;
2, regular cleaning of permanent magnets and pulverizer feeder permanent magnet Impurities;
3, the fineness of the pulverized finished product;
4, regularly clean up or replace the dust collector bag (ensure the bag breathable), regularly check the working conditions of the solenoid valve (see It is possible to work properly);
5. Regularly check the wear of the pulverizer to the wear of the mill, see whether it belongs to normal wear;
6, often pay attention to the vibration of the pulverizer;
7. When the wear of the pulverizer hammer needs to be replaced, pay attention to the weighing, ensuring that the weight difference between the two-opposite (1800 direction) hammering shaft is ≤1g and two opposing (1800 Direction) Hammer Point The total weight difference is ≤2g;8, when the mill screen wear is seriously replaced, pay attention to the flatness of the new screen and the size of the screen. Reasonable, installation is in place, make the screen on the screen in the face of the screen;
9. The opening degree of the impeller feeder fill the door should be adjusted appropriate;
10, if the crusher vibration is found Large, noise high abnormal abnormal conditions should be closed immediately;
11, the spindle bearings should be added 80 g of grease after 40 hours of operation, but only 60%, after 1800 hours of operation, the bearing box should be removed, Replace all used grease.
The whole ceramic Impact Mill is a comprehensive domestic and international similar crusher technology, and there is an advantage of impact breaking and hammer. New fine breaks, coarse mills, which optimize the design and development of major technical parameters, have the characteristics of breaking the crushing ratio, smooth energy consumption, simple structure, convenient operation and maintenance. It is a real multi-purpose, high efficiency, low-cost new crushing equipment.
When replacing fresh lubricationWhen lipoften, add grease in the surrounding area of the roller and the bearing ring, and add a grease in the bottom case to 1/3 to 1/2, do not add more grease;
12, When the ultrafine pulverizer production suddenly declines, in addition to the factors of the raw material, we should focus on whether the replacement door is in place, whether the pipe is leaking, the pulse bag is blocked, the solenoid valve, the fan is working properly. The ceramic lining pipe is made of high-tech production process - self-provisional high temperature clutch synthesis method.
The tube consists of three layers of corundum ceramics, transition layer, and steel from the inner to the outside, and the ceramic layer is formed in a high temperature of 2,200 ° C (Al2O3) to form a strong bond through the transition layer with the steel pipe.
