Ultrafine Jet Mill consists of coarse, fine break, wind conveyance, etc., which compresses high-speed airflow to make material crushing achieves a working purpose. And because it utilizes the wind energy to be pulverized into powder-like characteristics, the traditional screening procedure is simplified, and the process of removing large particles unbrurability after the traditional crushing will also be saved.
The main technique of the ultrafine pulverizer actually draws on some of the advantages of Japanese equipment, and then improved according to our actual national conditions, there is a new device that can be smashed. The abbreviated material is simultaneously loaded, but it is still running alone and does not affect each other. It has more functions and structural sections. Moreover, its equipment is operated stable, the sound is extremely small, and the working efficiency is much more efficient than the old generation of equipment.
The new generation of equipment has made many adjustments in the appearance, and overall looks more flexible and lightweight than before, and can be used more extensive, usually do not work The data can be adjusted by the own settings, which have a non-crushing of various drytries and minerals. Air flow milling is compressed by the Raval nozzle accelerates the supersonic gas stream, and the injection zone is brought into the pulverization region to cause the material to be fluidized (the airflow expansion is suspended, and therefore, each particle has the same motion state). .
Compared to the previous generation of products, the currently tested materials from Jet Mill are lower, more uniform, and for some Chinese herbal medicines and thermal materials can also be pulverized. And the device is still equipped with a centrifugation in the device, while the synchronous operation can be graded while the pulverization operation is completed, and the material of the pulverized requirement is obtained by the exhaust port, and the crushing requirements are not reached. Decan until the request is reached.
The new generation of ultrafine Jet Mill is more adequately handled when it is improved, and it is also more suitable for some thermal materials and some of the hardness of material. The ceramic lining pipe is made of high-tech production process - self-provisional high temperature clutch synthesis method. The tube consists of three layers of corundum ceramics, transition layer, and steel from the inner to the outside, and the ceramic layer is formed at 2200 ° C or higher.Magaginal jade (Al2O3), a strong bonding is formed by the transition layer with the steel pipe.
