The vacuum charge machine forms a negative pressure gas stream under vacuum, and under this gas flow, the bulk material is delivered into another container in an instantaneous manner.
Since the material is always in a vacuum during the delivery process, even if the pipeline leak occurs, the material will not leak the material into the surrounding environment.
A: Vacuum pump produces a vacuum through a vacuum conveying device. The material is inhaled from the feed port with the suction hose to the suction port
B: The vacuum is isolated from the filter bin of the separation container to collect the material in the silo. The cyclone separator prevents the fine powder from entering the filter to increase the efficiency of the filter.
C: When the silo is filled with material, the vacuum pump is automatically turned off, and the pressure in the conveying device reaches the balance. The discharge valve is turned on, and the material flows out through the discharge port and directly falls into the storage container.
D: When disconnecting, the filter tank is automatically cleaned by the anti-airbag. Its special vibrator can assisted the following materials to increase the efficiency of delivering the viscous.
E: The discharge cabin is closed, and the entire delivery process is started again.
F: The vacuum charger is a new type of energy-saving environmental protection powder delivery equipment.
Welcome to Shandong AlPa Powder Technology Co., Ltd., above the working principle of vacuum charger, is SHANDON ALPA POWDER Technology Co., Ltd..
