When the pulverizer is working, it will first input the raw material, and then the raw material is crushing a process of outputting the tail.
Then how the process is done, and the ALPA powder will tell you about a process.
The material is entered into the fluidized bed pulverizer by the fding outlet. Under the driving flow, the material is collided with each other in the middle of the pulverized cavity and pulverized.
The qualified fine powder is carried by the rising gas stream into the turbo grace machine enters the upper portion of the fluidized bed, and the classifier is graded after grading the qualified material into the cyclone collector. T
he thinner tail material is carried from the airflow into the bag dust collector.
After filtration of the bag, the tail is taken into the discharge port under the dust collector, and the pure air is emptied.
Toot emissions prevent the tail from accumulating in the machine to prevent clogging of the machine. Xiaobian also reminds everyone that it must be cleaned in the machine when the machine is not working, to prevent damage to the machine.
Welcome to Shandong Alpa Powder Technology Co., Ltd., above the raw material input of Jet Mill devices.
