Crusher, it is also a crushing device, but it is still different from the pulverizer described above. So for us, for its understanding, it is necessary to start from the beginning. From the most basic beginning, it can be stabilized, and it will allow everyone to meet the crusher and master its related knowledge.
1. Installation of the crusher
(1) The crusher should be installed on the concrete, and if it is horizontal, then securely securely secured.
(2) In the installation process, pay attention to the vertical of the main body and the horizontal, and configure the power cord and the control switch in accordance with the regulations.
(3) After the crusher is installed, check whether the bolts are fastened, and whether the warehouse is tightened.
2. The operation of the crusher
(1) Crusher drivers should pass specialized training and assessment, must "three understand", "four sessions", and to be certified, otherwise it cannot be operated using the crusher.
(2) After the crusher is inspected, the operator can issue a power-on signal to start the machine.
(3) When the crusher is working, there should be no abnormal phenomenon. If there is a timely downtime check, the bearing and motor temperature should not exceed the specified requirements.
(4) The safety protection device on the crusher should be checked frequently, whether it is intact and safe and reliable to ensure the safety of production.
(5) The bearing of the crusher should be cleaned, but also pay attention to rust rust, so as to avoid rust, so that the crusher does not work properly.
Welcome to Shandong AlPa Powder Technology Co., Ltd., above the crusher manufacturer crusher equipment operation。
