Jet Mill's operating procedures, have been introduced, but its safety operation procedures, still have not been introduced, so for us, it is still necessary to learn and understand, not only because it is important for Jet Mill, And on the road to learn Jet Mill, this is necessary to master, otherwise you can't fully understand Jet Mill. Let's take the specific content below.
Jet Mill's safety operation procedures, its main contents are:
(1) Check if all lines, electrical components, etc. of Jet Mill, whether it works fine.
(2) Whether the machine is grounded, so as not to charge the housing and electric shock.
(3) Whether the machine spindle has a card death, if it should be handled in time.
(4) The machine has an abnormal situation during the operation, if there is a stop check.
(5) Check the blade, is tightened, whether the blade gap can reach the specified standard.
(6) The crusher is in use, checking the work room is enough or slidable, if it should be removed in time.
(7) After the pulverizer is running normally, it will begin to start the feed.
(8) The pulverizer should stop the feed before the shutdown. When the machine is completely discharged, it can be stopped.
(9) The feed should be uniform and cannot be excessive, so as not to increase the burden on the machine.
(10) Jet Mill can not be cleaned, overhaul, etc. during operation.
Welcome to Shandong AlPa Powder Technology Co., Ltd., About Jet Mill Operation Method.
