The laboratory was used as the technical staff of our company combined with advanced technologies at home and abroad, which was specifically used for ultra-small, high-value materials.
The machine is made of high-quality stainless steel, and the pulverizer is divided into horizontal, vertical, and the inner liner is made of corundum ceramics, disassembled, loading and cleaning is extremely convenient, and users can frequently replace the varieties of crushing materials.
This aspect of Jet Mill works, in front of Xiaobian has been specifically explained, so this knowledge point will no longer repeat (not understanding children's shoes can go to the warm application: Jet Mill principle), but some front Not yet, such as the maintenance of each part of it, so that everyone can more understand Jet Mill, master the content of it, so that it can be comprehensive and detailed, and in detail, it will not miss any knowledge. Clicked.
The following small series is not much nonsense, to launch specific content. Jet Mill's maintenance work, its main contents are:
(1) Dust wind machine
a. The interior of the fan is cleaned once a week, especially the leaves, because it is easier to accumulate.
b. Bearings are raised once a month, which is usually used to use 2 # calcium sodium based grease.
c. Fans open parking, as well as during operation, if there is an abnormality, or if the body is too large, then immediately stop, then check.
(2) Host
a. Hierarchical impeller, spiral feeder, smash nozzle, etc., should be checked once a year, mainly to see how wear is, whether it needs to be replaced.
b. The pulverizer should be cleaned up after a certain period of time, so as to avoid affecting the pulverization effect of the pulverizer, such as nozzles, mill, and filter bags.
c. Bearings should be subjected to the necessary lubrication, such as lubricating oil, but the amount is not too large to avoid the bearing temperature abnormally.
(3) Planet waste valve
a. Once an abnormality, it should be closed immediately.
b. Every three months, clean up an impeller and body inner warehouse.
c. Every three months, fill a lubricating grease for lubrication.
Welcome to Shandong AlPa Powder Technology Co.,LTD., above about pulverizer equipment manufacturers talk about Jet Mill working principle.
