The following content is mainly about the safety operation procedure for efficient pulverizer, and the specific content is about to be expanded.
1. Check whether the machine foot should be stable and smooth, whether the screw is locked, whether the filter is intact, and it can be launched after a comprehensive examination.
2. Start the power switch, the machine can be activated when the indicator lights up. At the same time, it is observed that the running current, as well as the operation, if any problem should be stopped immediately, then check and repair.
3. After the feed is normal, it can start the feed, and the speed cannot be too fast, the amount cannot be too much, and the material should not be too large or thick.
4. Operation
(1) During the pulverizer of the pulverizer, if there is an abnormality, then it should be downturn immediately, and then maintenance.
(2) After the material is smashed, it is loaded into the middle transfer bucket. After the barrel is full, cover the cover to prevent the material.
5. Cleaning
(1) Open the pulver feed portion and clean the machine, pay attention to clean it.
(2) After the pulverizer is cleaned, it should be dried to prepare for the next use.
6. Safety Precautions
(1) The operator should wear labor protection products before the operation.
(2) When the machine is added, pay attention to safety.
(3) The machine is in the process of operation, if there is an abnormality, it should be closed immediately, and must not work with disease.
(4) When the pulverizer is not completely stopped, the machine cannot be disassembled for cleaning or overhaul.
Welcome to Shandong AlPa Powder Technology Co., Ltd., the above for crushing machinery.
