pin mill of Pigment

Pin Mill of Pigment is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Pin Mill of Pigment uses multiple The relative-arranged nozzle forms a high speed airflow to achieve ultrafine pulverization. The crushed material enters the pulverizer with the rising airflow. Since the pulverized rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the pulverized rotor, and the center of heart is generated by the viscous action of the air flow. When the centrifugal force of the particles is greater than the heart force, that is, the pulverized particle size The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air.
Low temperature without mediμm smashing, ensuring high purity and physical characteristics of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet is more than 30% of the pulverization efficiency than the conventional gas flow mill, and the pulverization accuracy is higher.

ALPA equipment is small, the structure of the pulverizer can be highly machined ultrafine powder, avoiding the wear of the horizontal pulverizer pulverized part, and the service life of the equipment under the same material is the international similar product. Multiplier. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74μm.

ALPA CD PIN MILL OF PIGMENT Case Sharing: This customer is a large-scale comprehensive group enterprise specializing in the mining, powder processing and sales of heavy crystalline mines, which is imported from abroad. Slim crushing equipment. Later, by understanding, we know that our ALPA Limited Ultrafine Crushed Equipment, in terms of performance, in terms of foreign countries, and far exceeds foreign countries. Finally, after many exam, I purchased the PIN MILL OF PIGMENT from our company.

Technical parameters:
Finished granularity: 1250 mesh
Production capacity: 1.2-1.5T

Pin Mill of Pigment produced by our company can not only separate from ordinary powders 20- 2 μm is used fine fine powder, and can be used directly with mechanical pulverization equipment, forming closed circuits, improving pulverization efficiency, and avoiding high temperatures in the cavity to cause adhesion of thermal materials, Glue, leading to operations, and at the same time, the classifier has also received a good review of the majority of users, and friends who need it are in touch with us!