Turbo Mill of Potassium carbonate

Most of the current process using Turbo Mill production and processing stage of Potassiμm carbonate product of grinding is one of a very common way of manufacture, technology continues to improve along with the scientific productivity, grading equipment replacement is imminent. The performance and internal configuration of the grading equipment of the airflow must also keep the trend of the era to continue the upgrade of the product.

In addition to the particle size, the airflow crushing product has the characteristics of narrow particle size distribution, smooth particle surface, high purity, high activity, good dispersibility. Since the Turbo Mill of Potassiμm carbonate compressed gas expands adiabatically during the comminution process Joule Thomson cooling effect, and therefore also applies to the low melting point, heat-sensitive materials ultrafine grinding.

The gas-solid ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only the amount of energy is wasteful, but even the dispersion of certain particles will also becomerated. When the feed is grained, when the hard material is pulverized, the particle size of the feed is more stringent.
When the titaniμm powder is pulverized, when the calcined material is pulverized, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70, and cannot exceed 2-5 mesh.

ALPA silica powder Turbo Mill of Potassiμm carbonate Case Study:

The main products are a microsilica fused silica sand, fused silica powder, microsilica composite soft, high purity and ultrafine silica powder, active silica, complete crystalline silica powder, spherical silica powder and other specifications.
Main uses: photovoltaic solar industry and electronic packaging materials, high temperature refractory materials, aerospace materials, quartz glass tubes, quartz ceramic rolls, and coated copper industries.
parameters of the case:
Product size: 20μm to remove fines
hourly output: The separation efficiency of 60-90%

alpa Micro recommends that you use superfine Air Classifier, grading jet when the machine, the powder classifier and other equipment, must pay attention to regularly check the performance of the device, to prevent the failure occurred during use.