In this economically flourished area, many people know that Hammer Mill of EPVC, crusher technology is in a leading position in the same industry.
Hammer Mill of EPVC temperature increases, and when the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titaniμm powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
A electromechanical company is mainly dedicated to production equipment such as push furnace, roller furnace, mesh furnace and other products, and products are widely used in new energy batteries. , Electronic components and other fields. The company always adheres to the principle of "people-oriented, innovation as the first". The company has established a good relationship with multiple international companies. With exquisite technology, we will have our customers' support and trust. We will give back to our customers with quality products and services to make better contributions to electromechanical needs.
Case parameters:
Product particle size: D50: 15μm
Hour Yield: 600kg
