With the continuous development of pulverizer technology, Ring Roller Mill of TEA has gradually penetrated into everyday life.
Many manufacturers who want to make a crushing process will choose to buy a Ring Roller Mill of Tea, but not all crushers can apply production and processing, and the wrong processing method will make the pulverizer wear speed becomes fast. . The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large.
The device operates for a long time in a higher pulverized pressure, which requires uniformity of cyclical replacement loss.
The products after the crushing are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.
AlPa gel method White Carbon Black Ring Roller Mill of TEA Case Sharing: The main products of the customer include beer silica gels, an openings, catalyst carriers, and the like. The company purchased our AlPa Ring Roller Mill of TEA.
Technical parameters:
Finished product particle size: D50: 12-16μm 10-12μm
Production capacity: 250-450kg
ALPA also believes that future airflow pulverization technology will become Being better, users who need to purchase such products can contact us.
