Fine Powder Cell Mills for crushing is a very practical and convenient industrial crushing equipment. Most chemical industry, polymer materials need to be used, and the Erfai crusher is smudged, the granules are delicate, affordable.
Fine Powder Cell Mills for crushing The temperature will rise. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
A mechanical company is a research and development of a complete set of equipment such as solder wire equipment, tin powder equipment, solder paste equipment, pure zinc equipment , Manufactured high-tech enterprises.
With complete, scientific quality management system and powerful R \u0026 D team, and continuous improvement of product performance.
The company is also a large-scale professional equipment manufacturing enterprise in China.
Case parameters:
Product particle size: Remove 20UM with fine powder
hour production: sorting efficiency 60-90%
