In the rapid development of rapid, there are many people have a certain understanding of Micro Impact Mills Equipment, and crusher technology is in an absolute leader in the industry.
Many manufacturers who want to make a smashing process will choose to buy a Micro Impact Mills Equipment, but not all crushers can apply to production and processing, and the wrong processing method will make the pulverizer wear speed. The wear of the pulverizer is too fast, and the inner cavity of the pulverizer of the comparison should be used when the material hardness is too large.
The device operates for a long time in a higher pulverized pressure, which requires uniformity of cyclical replacement loss.
The products after the crushing are generally single peaks. If there is a double-peak or peak main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest air supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform in liquidity, and the stable control feed speed. The filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cake in the pulverizer chamber will then restore production.
Erman Organic Painting Micro Impact Mills Equipment Case Sharing: The company is a Taiwan chemical raw material company. In 19 years, the company purchased a mechanical grinder for pulverizing organic pigments from us. .
Technical parameters:
Finished particle size: D50 less than 325 mesh
Production capacity: 300kg
Shandong Er Pie focuses powder projects such as crusher, grace machine, modified machine Production, R \u0026 D, sales of equipment, manufactured by three parts of the main unit, auxiliary machine, and electronically controlled control, gathering gas flow, airflow classification, mechanical and smash, flexible realizing airflow, airflow classification, Mechanical is smashed into one, suitable for 325 mesh-100,000 mesh (45μm), suitable for a variety of crushing scenarios, from research institutes, college laboratories, new products, new materials, new materials, new materials. It is necessary to make the device selection according to the actual needs. Welcome new and old customers to come to consult!
