People currently use in daily life are also more, the gas flow pulverizer is smashed into the standard size, which is generally smashed into micrometers, usually our equipment is more The device is composed, and is usually composed of a portion of a coarse, fine powder or a wind device, or the like. The main purpose is to use wind energy to become powder, which has canceled traditional screening when performing, and the main application is used in many industries such as mining or building materials. Some industries such as metallurgy or building materials, chemicals, etc. are used to work with large crushers.
Ultra-Micro Mechanical Rotor Mills Pulverizer Machine work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Taking air as an example, the critical speed at room temperature is 320 m / sec, and when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by overheating steam, the vapor pressure is typically from 0.8 to 1.7 MPa, and generally the pulverized calcined material is high, and the material after the pulverized surface is low.
El Piese Crystal sorbitol Ultra-Micro Mechanical Rotor Mills Pulverizer Machine Case Sharing: A cosmetics company in Taiwan requires a large amount of transistor sorbitol with large capacity, understands the agents of Shandong Erp To our company can customize the service. After many incident experiments. Finally purchased a Ultra-Micro Mechanical Rotor Mills Pulverizer Machine, which our company.
Technical parameters:
Finished granularity: 10-200 目
Production capacity: 10T
Ertra-Micro Mechanical Rotor Mills Pulverizer Machine equipment for production in actual Very good reputation in production applications, and also won the praise of users and friends. If you need to buy Ultra-Micro Mechanical Rotor Mills Pulverizer Machine, please feel free to contact us.
