In numerous pulverization mode, Spiral Jet Mill for Refractory Clay ORE has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, good dispersibility. In particular, it is suitable for disinfection of materials such as pulverization drugs.
High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, In the powerful centrifugal force of the Spiral Jet Mill for Refractory Clay Ore, the thickness of the material is separated from the separation, the fine particle size of the grading wheel into the cyclone separator and dust removal, continues to be pulverized. The classifier produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the grading requirements of the material. The grading machine has a greater processing amount, energy saving, simple operation, and low maintenance cost.
Spiral Jet Mill for Refractory CLAY ORE is designed and developed using a mixed powder spraying principle. Suitable for pharmaceutical, food, chemical and other industries. It is widely used. Cold source forms a closed circuit circulation system, which takes advantage of energy and energy conservation: Wenjing pulverized can drop to zero down 196 degrees, depending on the brittle temperature of the material, the temperature can be controlled by the pulverization process, select the best grinding temperature, reduce the pulverization fine The degree can reach 10-700 energy consumption, and even reach micron wood fineness.
SPIRAL JET MILL for Refractory Clay ORE installation notation
1. Preliminary checking of host devices such as classifier, fan There is no abbreviation in the cavity and the fan airway, turn the hierarchical impeller and the wind turbine, and observe whether it is flexible.
2. Check the degree of fastening of the equipment pre-installed components, and must be added to the lubricating oil to be lubricated.
3, the mounting grading wheel should strictly prevent collision, classify the host, and the fan should be tested, and the level is specified by the gasket, and there is a basic requirements and the foundation fixation.
4, require the sealing pipe interface to configure the sealing gasket.
5, after the layout machine is installed, first observe the direction of grading motor.
6. When the control cabinet is installed, the corresponding relationship between the terminal sequence number and the equipment is carefully verified.
7. After the installation is completed, the first empty car is running 1-2 hours, and it is easy to securely check the accuracy and coordination of the equipment action at any time.
The customer lacks experience in powder grading, but many ultrafine powder is currently required to select ultrafine powder for ultrafine powder. The customer has chosen our ALPA as a partner after investigation. Provide a grading machine device for its customers' ceramic powder production lines.
As a crusher manufacturing large enterprise, Shandong ALPA has been working to provide customers with greater value, the fineness, production capacity and installation site of each project is important information for custom selection, pre-sales service session.
AlPa There are 24-hour online customer service to answer questions, provide an ideal grading machine production line solution, and provide the factory quotation to increase escort for ceramic powder grading projects. Welcome major ceramic powder manufacturers to inquire.
