Jet Mill for Secondary Graphite can be used for important or need to be grounded to granular product processing, the ALPA ultrafine pulverizer product is good, affordable, factory direct sales, also push after-sales maintenance service for customers, service attitude
[ 123] Jet Mill for Secondary Graphite provides power by the adiabatic expansion of the compressed air and compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product. In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize. The air pulverizer has an upward nozzle under the bottom of the pulverized chamber tape, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by the nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.Jet Mill for Secondary Graphite features:
1. High yield, low energy consumption, high grading efficiency.
2. Particle size: This machine uses impeller to grade. Stable classification process and special sealing measures effectively prevent the leakage of crude particles, so that the product has no large particles, the particle size is concentrated, and the grading accuracy is high.
3. The structure is reasonable, and 1-6 kinds of products can be produced simultaneously according to user requirements.
4. Strong applicability: Can form closed or open joint operations with various mill (air mill, mechanical mill, ball mill, thundering machine, vibrating mill, etc.).
5. High degree of automation.
Super Micro Jet Mill for Secondary Graphite Inspection Work:
1, newly installed equipment Foreign objects such as slag. In the absence of fan and main motor, open the impurities below the feed mouth, let the impurities and washingThe material is discharged here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.
ALPA Pigments Jet Mill for Secondary Graphite Case Share: This customer needs to use the pigment ultrafine pulverized equipment during its production. Through the ultrafine pulverization of the pigment to improve the quality of the product, after more than the same type of equipment, we have chosen our AlPa Jet Mill for Secondary Graphite. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range.
Technical parameters:
finished particle size: D90: 13μm;
Production capacity: 130kg / h
Welcome to Shan Dong Alpa, company specializing in Jet Mill for Secondary Graphite products Technology production and development and services, the company provides customers with safe and reliable products and services to solve the worries of customers.
