At present, Spiral Jet Mill for Xanthan Gum has gradually entered people's lives, more and more plants, and companies are using the equipment.
The principle of Spiral Jet Mill for Xanthan GUM job is to use high-speed airflow to cause particles of the material itself to collide, and the airflow is used for shear effects of material impact, the impact of materials and other components and shears. The material is caused to become more pulverized and the particle size distribution is narrower. Although in certain areas, Spiral Jet Mill for Xanthan GUM has an irreplaceable advantage, but it also has a shortcomings of a headache, which is relatively high. The principle has passed the precipitation of time and multiple applications, which is more mature, and has been widely used in mineral materials, chemical materials, pharmaceuticals and other industries.
The working principle of Spiral Jet Mill for Xanthan GUM is a complete crushing system composed of crushers and cyclone separators, dust collectors and air blowers. After the compressed air is filtered, the high-speed nozzle is sprayed into the crushing chamber, and the material is pulverized by repeated collision, friction and shearing at the intersection of the multi-high pressure airflow. The crushing material moves together with the rising airflow to the classified area with the suction of the fan. Under the action of centrifugation, the thickness of the material is separated, and the graded cyclone is required to grade the cyclone to enter the cyclone dust collector, and the coarse comminution continues to be pulverized down. Suitable for dry crushing of various materials that are less than 9 in the Moh, especially for high hardness, high purity, high value-added crushing materials. It includes a vertical hierarchy device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. Low temperature without media crushing. It is especially suitable for thermal sensitivity, low melting point, sugar-containing and volatile substances. The grinding process is mainly dependent on the collision of the material itself, and is different from the impact of the mechanical crushing blade or the hammer on the ground on the ground, so the equipment is high, and the product is purity.For Spiral Jet Mill for Xanthan Gum blocking troubleshooting, Xiaobian talks about your opinion, I hope to have some reference roles. Crushes blockage is the most common fault of machinery.
It may be one of the most common failures in mechanical design, but because improper operation can cause many faults.
(1) The feeding speed is too fast, the load is increased, causing clogging. During aquaculture, pay attention to the deflection angle of the current table pointer at any time. If the rated current is exceeded, the motor overload and long-term overload will burn the motor. This should be reduced or closed immediately, but it can also be controlled by increasing the feed speed to control the feed speed. Because the speed is fast, the load is large, the load fluctuates great. Therefore, the current of the rolling mill is generally controlled around 85% of the rated current.
(2) The inclusion of the discharge tube is different or the interference is too fast, and the general pulverizer exit is blocked, and the conveying equipment does not match, resulting in weakening or calm of the drainage tube. In order to find faults, we must first clarify the export transport equipment, do not change, adjust the amount of feed, and the normal operation of the equipment.
(3) The water content, aging, screening, crushing and sealing material of the hammer hammer are too high, and the general grinding will be blocked. It is necessary to regularly update the working status of the hammer aging and the serious aging, and check the screen regularly. Improve the production efficiency of universal grinding machines, improve the reliability of non-blocking and grinding.
Technical parameters:
finished particle size: 10-45μm
Production capacity: 300kg
