Air Classifier Mill for Plant ASH is good, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.
Air Classifier Mill for Plant Ash is very widely used in industrial production, usually used to smash the added value of larger materials, after ultrafine crushing, generally the application of materials is wider, value Higher, being loved by the industry.
The working principle of Air Classifier Mill for Plant ASH is: the compressed air is dried, and the pulverizing cavity is entered by the nozzle. In the pulverizing cavity, the material can be pulverized by a high pressure gas stream. Thereafter, the crude material can be separated from the centrifugal force generated by the grading turbine. Particles that meet the particle size requirements are in the cyclone separator and the dust collector, and the particles collected, and the particles that do not meet the requirements continue to be pulverized.
Super Micro Air Classifier Mill for Plant Ash debugging before debugging:
1, newly installed equipment, it will inevitably residually residue, welding head, Solder and other foreign matter. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.
ALPA Trimage Materials Air Classifier Mill for Plant Ash case Sharing:
A lithium electrode material company main product is \"lithium electrode material\", the most important component of the lithium ion battery includes an electrolyte, Isolation material, positive material, negative electrode material, outer casing, etc. Efficiency, Gao AnHigh-end lithium battery sector requirements for full longevity life performance.
Case parameters:
Product particle size: D50: 9.1μm
Hour Yield: 300kg
Welcome everyone to browse Shandong AlPa website, company specializing in the production of Air Classifier Mill for Plant ASH product technologyDevelop and serve, high-energy technical experts, professional after-sales service teams solve the worries of our customers.
