Since Steam Jet Mill For Toner is widely used in various industries, the research and development of classified machines at home and abroad attaches great importance to it. In the current market, there is a great development space.
In the process of production, Steam Jet Mill For Toner mainly utilizes the compressed air to pass through the freezing, filtration, and drying in the apparatus, form an supersonic air flow through the nozzle inside the device. After a powerful pressure rotation into the grinding chamber, the material to be pulverized in the grinding chamber exhibits a fluidized form.Steam Jet Mill for Toner Operation Performance: Auxiliary, the host is set in the centrifugal grading device, which can be refined, and the wind is cut, and the wind is cut, no sieve Or mesh, powder particles can be adjusted arbitrarily, after crushing materials, negative pressure delivery to the exhaust valve port, reach the product requirements, and the ultra-fine classifier is widely used in chemical, dyes, paints, pharmaceuticals, food and other industries.
How to correctly operate Steam Jet Mill for Toner?
Before booting, the connection site, sealing and line, etc.
The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.
Technical parameters:
Finished granularity: D90: 15-30UM
