Jet Mill for ProGesterone

With the continuous advancement of pulverizer technology, Jet Mill for ProGesterone has been familiar with people. The most popular crushing device is now the Jet Mill for ProGesterone. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.

Jet Mill for ProGesterone technology is designed and manufactured in the core work.

There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.

The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.

JET MILL for PROGESTERONE Working Principle: Airflow Crusher and Cyclone Separator Distant Machine Encompasses a complete pulverization system, compressed air is filtered and dried, and then through the Raval nozzle in multiple high pressure air intersection Enter the crushing room at high speed. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classification machine, the fine particles that satisfy the particle size required by the grading wheel with thickness, fine product to collect the fine particles and dust collectors by the grading wheel with the thickness, fine particles of the particle size and the dust collector and dust collectors. And continue to break in the broken area.

High-pressure gas (compressed air, superheated steam or other gas) injected from the pulverization chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber were subjected to tangential shock of the air flow injected from different angles. The solid particles collide with each other and friction in the mixed airflow. Since the temperature generated during the pulverization is small, it is conducive to the low melting point crushing material. When toxic, flammable or radioactive substances are crushed, superheated steam is usually used to prevent outwardly spread.
This is because all materials can be precipitated when steam is condensed. The airflow pulverizer uses the material to achieve huge kinetic energy under the action of the high-speed airflow, causing the high-speed collision and the severe friction between the particles, and the high-speed air flow generates shear effects, therebyThe purpose of the pulverization is achieved.


Jet Mill for ProGesterone has many core accessories, and these attachments are also fragile parts. Once they don't pay attention to maintenance, it will cause serious consequences, especially if the air flow grinding spindle will cause stopping. However, the output loss cannot be estimated, and the following sections describe the reasons for the fracture of the gas flow grinding main axis.
The cause of the airflow grinding main shaft is easy to damage:

1. Since the pulverizer is a long-time crushing and ground bulk ore, the mechanical impact will cause fatigue damage to the spindle, if it is operated, the surface of the spindle Will wear, if you don't pay attention, cracks are generated.

2. The air supply will pass the airflower overload. When gas flow is used, you need to feed it properly, and each machine is limited. If this is exceeded, the component is easily damaged in the load operation, which will affect the overall service life of the airflow.
3. During mining and transportation, ore is often mixed with some waste metals. When these objects are in electromagnets at the upper portion of the belt, the electromagnet cannot be Excluding, causing these materials in ore and mud into gas flow, resulting in frequent iron, resulting in frequent impact on the spindle and other portions.
The above is why Jet Mill for ProGesterone spindles are easily damaged.


AlPA Composite Powder Jet Mill for ProGesterone Case Sharing: This customer is a renewable resource company, the customer needs to select a different particle size selection of composite powder, and it is necessary to select a super fine powder less than 30 μm. . Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our AlPa, and selected our vertical grading machine equipment. Product particle size: D97 ≤ 30μm hour yield: 80T
Welcome major composite powder manufacturers to visit, incompetent experiments.

ALPA also believes that future airflow crushing technology will become better and better, users who need to purchase such products can contact us.