With the continuous advancement of crusher technology, Jet Mill of Octabromide has been familiar with people. The most popular crushing equipment is now Jet Mill of Octabromide. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.
Jet Mill of Octabromide has generally replaced the traditional mechanical crusher in real-production, and its characteristics are:
1. Simple structure, disassembly It is simple to clean, convenient, just one person can complete the operation, disassembly and cleaning.
2, elliptical pulverizing cavity design, less airflow resistance, so that the compressed air utilization reaches the highest and reduces loss.
3, Jet Mill of Octabromide causes the purity of the finished product, no impurities, and non-pollutant materials due to its pulverization principle.
4, the pulverization is good, the particle size distribution is uniform.
The above is an application for you to introduce Jet Mill of Octabromide in the industry.
JET MILL OF OCTABROMIDE Main Performance Features:
A vertical hierarchical device, the product particle size is adjustable between D97: 8-150 microns, the particle shape is good Narrow particle size distribution. It can be used in series with multi-stage classifiers and produces a product having multiple particles.
2, the device is easy to disassemble, the inner wall is smooth, no dead angle. The entire system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.
Let's talk about how to correctly use Jet Mill of Octabromide
1. Prepare before booting the host, attachment machine, pipeline, and valve, whether it is intact, whether it works fine.
Second, open
1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter - feedMain valve - compressor - Stepper impeller motor - cyclone discharge, dust removal switch - fan - total power supply - air compressor.
4, repair
1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.
4. After the filter bag, you should clean or replace it.
V. Note
1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.
ALPA Cassava Starch Jet Mill of Octabromide Case Sharing: This customer is a new type of panel industry, dedicated to providing professional and excellent plywood new filler for plywood industry customers. The company needs to be used in the production process of the company. Multi-party examine, finally purchased the CSM1100-V mechanical grinder from our AlPa.
Technical parameters:
finished particle size: 98% over 325 mesh
Production capacity: 2T
If you have something about other crushers, you want to know, welcome to consult!
