It is well known that the product technology of Spiral Jet Crusher of Citric ACID has received extensive attention from the industry.
Airflow pulverized products except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape, high purity, high activity, good dispersibility, etc. Since Spiral Jet Crusher's Citric ACID generates Juromon cooling effect during the pulverization process, it is also suitable for ultrafine pulverization of low melting point and thermal material. The gas ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated. When the particle size of the feed is pulverized, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.
Spiral Jet Crusher Of Citric Acid uses materials to achieve huge kinetic energy under the action of high-speed airflow, causing severe friction between high speed collisions and particle in the pulverizing chamber, while high-speed airflow generates shear effects, thereby The purpose of the pulverization is achieved.In order to achieve better use, you must also pay attention to the daily maintenance of Spiral Jet Crusher's Citric Acid, pay attention to the following:
1. In the production process, the gas flow baffle should be checked regularly. Liter, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When using the pulverizer, the drive belt is easily stretched, and should pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should often be performed to ensure quality and production.
4. Continuously check the wear of blade and bushing, if the productivity is lowered, the particles are thicker, and will be replaced after wear.
5. The change period of the pulverizer bearing is 2000 hours, and the amount of the bearing cavity is 1 ≤ 2 (try) or 3 ≤ 4 (try), otherwise the bearing temperature is too high.
A energy company is a specially engaged in lithium-ion power cells for new energy vehicles, and the R \u0026 D of lithium-ion batteries in the energy storage And industrialized high-tech enterprises, the company actively responded to national policy calls, in order to promote new energy vehicles, this strategic emerging industry is rapid, sustainable developmentAdhere to the road to independent research and development, have a core technical system with complete independent intellectual property, and successfully develop a number of series of lithium-ion power battery batteries, and has been widely used in China's electric new energy vehicle field, and market distribution has spread all over the country.
Case parameters:
Product particle size: D50: 15μm
hour yield: 600kg
