Spiral Jet Crusher's balance performance is good, only need to be produced in a smooth floor, and low noise, and the dust leakage can be avoided during the pulverization process, which is favored by the powder industry.
Spiral Jet Crusher of TiCragrelor is based on the size of the powder particle size, the specific gravity is different, and the settlement speed is different from the principle of the settling speed in the gas. The classifier, cyclone separator, dust collector, and the introducer make a set of hierarchical systems. Under the action of fan pulleys, the material is moved at a high speed, and the up airflow into the grading area. Under the action of the powerful centrifugal force generated by the high-speed rotation grading turbine, the coarse, fine particles are separated, and the fine particles that meet the particle size requirements by the gap of the grading wheel blades or the dust collector are collected. After the crude particles are partially fine particles, the velocity along the wall to the secondary air is disappeared and reduced.
The strong washing effect of the secondary wind, the thick particles are separated, and the fine particles rise to the secondary level of the secondary level, and the crude particles reduce the discharge port.
Now let's take a look at the performance advantages of Spiral Jet Crusher's TiCagrele!
Secondly, the gradular product of this classification machine is adjustable, and the replacement is also very convenient.
Furthermore, since the flow performance is good, the grading efficiency of the ultrafine airflow classifier will be high.
Not only that, the classifier also adopts high quality production materials, so the wear resistance of such grading machine equipment is also very good.
Spiral Jet Crusher's is widely used, do you know how to use it correctly? The following content hopes to help you.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops is:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removalSwitch - Fan - Main Power - Air Compressor.
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
AlPa Graphite Spiral Jet Crusher of TiCagrele case sharing: The customer is a research institution, in its research, the graphite needs to be superfined. By multiple incoming experiments finally chose our AlPa Spiral Jet Crusher of TiCagrelor.
Technical parameters:
Finished particle size: D50: 10-30μm
Production capacity: 30-50kg
Shan dong alpa specializes in the production of Spiral Jet Crusher of TiCagrelor product technology Develop and service, welcome to consult. With perfect quality, excellent service, the most affordable price, customers provide the best products and services for customers.
