Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.
Fluidized Bed Jet Mill OF POLYIMIDE POWDER is a high-performance grading effect that the ultrafine powder below the micron-level, especially the high-end powder material is capable of providing high performance grading effects that other forms of grading equipment. Three different particle size ranges of more than three or more different particle size ranges can be obtained by narrower particle size range, and there is a wide range of applications of powder raw materials; there is a wide range of applications in metal and non-metallic fields.Fluidized Bed Jet Mill of Polyimide Powder's working principle consists of a hierarchy, a cyclone separator, a dust collector, and a guide. Under the pulverizing fan puller, the lower end of the gas pulverizer is moved upward to the hierarchical region, and the thickness and fine product are separated from the strong center of effort to the high-speed rotation grade turbine. The cyclonic separator or dust collector is collected by the grading wheel, and fine particles required to meet the particle size are collected, and the coarse particles are collected. The velocity of the entrained fine particles disappears and falls along the two towers of the cylinder wall. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles drops to the discharge port.
How to continue the life of the Fluidized Bed Jet Mill of Polyimide Powder? Here are the following aspects:
1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting. 2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.
3, regular inspections for the lids, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.
ALPA gel method White Carbon Black Fluidized Bed Jet Mill of Polyimide Power Powder case Share: The main product of the customer includes beer silica gel, an open agent, a catalyst carrier, and the like. The company purchased our AlPa, a Fluidized Bed Jet Mill of Polyimide PowDER.
Technical parameters:
Production capacity: 250-450kg
Shan Dong Alpa is committed to Fluidized Bed Jet Mill of PolyimidePowder, has a mature process process, strong technical strength, specializing in Fluidized Bed Jet Mill of Polyimide Powder, survive in quality, welcome everyone to come to consult.
