In this economically booming area, many people know that Air Classifier of Konjac Flour, crusher technology is in a leading position in the same industry.
When the Air Classifier Of Konjac Flour screen material, the screen has good commonity under the pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the classifier without the need for rotating components. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors. The material is driven by the blower of the airflow pulverizer. The lower end of the classifier moves upward moves up to the hierarchical area, the strobe, the strongest centrifugal force generated by the high-speed rotation grading turbine. The fine particles that satisfy the particle size requirements are entered into the cyclone separator or dust collector by the gap of the graded wheel blades. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.AIR Classifier Of Konjac Flour Working: Crusher and Cyclone Separator Drainage into a complete crushing system, compressed air is filtered and dried, then through the Raval nozzle in multiple high-pressure air intersection Enter the crushing room at high speed. stream. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classifier, the fine particles that satisfy the particle size required by the grading wheel are separated from the thickness and fine product to the t-cyclone and dust collector by the grading wheel with the thickness of the granularity. Particles and continue to break in the crush region. High-pressure gases (compressed air, superheated steam or other gases) injected from the broken chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber are subjected to the tangential impact of the air flow injected from different angles, so that the solid particles are mixed in a mixed airflow. Mutual collision and friction and refine.
Air Classifier of Konjac Flour is widely used, do you know how to use it correctly? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly. 2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor power, open the total power boxSet the inverter frequency and start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA AIR Classifier Of Konjac Flour Case Sharing: The company often uses Air Classifier of Konjac Flour, and the electrifrees are desulfurized, and sodium hydrogen carbonate is needed. The company has won many power plant dry desulfurization projects with our AlPa's cooperation. It is very satisfied with the Air Classifier of Konjac Flour we produted.
Technical parameters:
Finished granularity: 700 目
Production capacity: 800kg
I hope everyone can buy the airflow crusher product of the heart!
