We all know that Air Classifier Mill for Carbon Material is a strong airflow pulverized device, and many stubborn hard materials will be cut into a uniform block,
airflow In addition to the particle size, the crushing product has the characteristics of narrow particle size distribution, smooth particle surface, high purity, high activity, good dispersibility. Since Air Classifier Mill for Carbon Material, the compressed gas is compressed during the pulverization, which is also suitable for low melting point and ultrafine pulverization of thermal materials. The gas ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated. When the particle size of the feed is pulverized, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.
AIR Classifier Mill for Carbon Material:
1
2, the outer casing uses water cooling and its own air volume delivery crushing material, increase the temperature, and pulverizing the thermal material.
3, the wear of the blade is generated by a large amount of ultrasonic eddy current generated by the back of the blade and the vibration of the high frequency pressure.
4, the structure is compact, there is no dust overflow problem.
AIR Classifier Mill for Carbon Material is a very important link, which describes the maintenance method of Air Classifier Mill for Carbon Material.
1. When the machine starts or starts, the appropriate amount of grease should be applied to ensure its life.
3, regularly check the reliability of the equipment, prevent accidents or accidents.
4, the direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine.
5, equipment maintenance should be carried out by professional and technical personnel, and others must not be carried out to avoid damage to the equipment.
6, electrical components and lines should be checked regularly, whether it is intact, and the ground is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contaminating materials.
AlPa Peel Pea Air Classifier Mill for Carbon Material Case Sharing: The company uses food professional processing enterprises in R \u0026 D, processing and sales, and has been discovered by multi-examination or our ALPA's Air Classifier Mill for Carbon Material to meet all needs.
Technical parameters:
Shandong Alpa focuses on powder engineering equipment and other powder engineering equipment and other powder engineering equipment production, research and development, sales 20In the year, the small ultra-fine pulverizer produced by the host, auxiliary machine, electric control, gaining gas flow, airflow classification, mechanical pulverization, flexible realizing airflow smash, airflow grading, mechanical powder, 325-10000 (45μm-1μm), suitable for a variety of crushing scenes, from research institutes, college laboratories, new products, new materials, new materials, new materials, and tests.It is necessary to make the device selection according to the actual needs.Welcome new and old customers to come to consult!
