Jet Mill of Zirconium Carbide is an industrial equipment. With the development of society and the needs of people's lives, the industrial demand is increasingly demanding various fine powders, and the requirements, purity and pass rate requirements are also It is increasingly high, and the application of classification machine is also more extensive.
Jet Mill of Zirconium Carbide is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
JET MILL OF Zirconium Carbide Working: Crusher and Cyclone Separator Drainage Machine Encompasses a complete crushing system, compressed air is filtered and dried, then through the Raval nozzle in multiple high pressure air intersection Enter the crushing room at high speed. stream. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classifier, the fine particles that satisfy the particle size required by the grading wheel are separated from the thickness and fine product to the t-cyclone and dust collector by the grading wheel with the thickness of the granularity. Particles and continue to break in the crush region. High-pressure gases (compressed air, superheated steam or other gases) injected from the broken chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber are subjected to the tangential impact of the air flow injected from different angles, so that the solid particles are mixed in a mixed airflow. Mutual collision and friction and refine.Operation Jet Mill of Zirconium Carbide What should be paid to? Before running, the operator needs to confirm whether the feed tube inlet and the exit of the raw material feed tube are foreign. Whether there is any raw material at the exit. If the foreign matter is found to handle a clean and then boot.
When the grading machine is operating normally, in order to maintain the stability of the grading, the pressure of the supply tube compressed gas is required to be monitored. Check if the dust collector pressure loss of the laboratory classifier is stable. Decompose, cleaning, inspected, and maintaining the laboratory classifier must be disconnected to avoid danger.
AlPa Kaolin Jet Mill of Zirconium Carbide case share: This customer is a Kaolin powder company in India, which needs a grading equipment to super microThe powder was selected, and many companies were examined, they did not find appropriate.Finally, our AlPA meets the customer needs for the classifier equipment provided.The set of equipment has reached 4T per hour.
The equipment market is changing. At present, Jet Mill of Zirconium Carbide has certain demand in the market, but the society is constantly evolving, no matter what industry needs to keep pace with the times, it can lead the industry.
