Spiral Jet Crusher of Manganese Carbonate is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is smudged, the granules are delicate, and the price is affordable.
Spiral Jet Crusher of Manganese Carbonate is an industrial equipment that consists of a ball mill and a vibrating mill. The power is 0.75 kW. With the development of society and the needs of people's lives, the industrial community is getting bigger and bigger, and the requirements for fineness, purity and pass rate are increasing, and the processing rate is very high. Micro-powder equipment is usually extremely expensive and low productivity.What kind of performance characteristics have spiral Jet Crusher Of Manganese Carbonate?
This classification device adds a vertical classification device in the design and research and development, and the particle size of the product can be achieved 97- Try between 150 mm, and can produce a good granular shape, a narrow distribution, and a product form of multiple particle segments. There is also a classifying machine in disassembly cleaning, more and more rapidly, and the inner wall is smooth without dead angles. The whole system is closed, less dust, low noise, and the production process is clean and environmentally friendly.
Spiral Jet Crusher Of Manganese Carbonate Job Safety Application Basic Requirements
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is a vibrationMoving, noise, bearing and body temperature is too high, outward spray, etc., should be closed immediately, and the fault can continue to work.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.
ALPA Gypsum Spiral Jet Crusher's Sharing: The company is a more well-known non-metallic mine company in South Africa. The company's main products are ultra-fine ultra-fine powder in non-metallic mines such as square solutions and gypsum. The company learned about our equipment through our website and saw our case.
Finished granularity: D97: 5UM
Production capacity: 140kg
If there is related requirements, please call us!
