Environmentally friendly Spiral Jet Mill for Carbonyl Iron Powder has gradually become the market leading to mechanical equipment. At this stage, the modern new mechanical equipment in the machinery processing and manufacturing industry has gradually replaced traditional roughing machinery and manufacturing production. Production has also become a new dominant leading to the implementation of technological innovation upgrades in the machine industry.
Spiral Jet Mill for Carbonyl Iron Powder production line usually has pulverizer, bucket hoist, storage box, vibration feeder, ultrafine mill, frequency classifier, cyclone powder collector, pulse dust removal system , High pressure blower, air compressor, electrical control system, and other components. Eliminates the infrastructure construction link, saving overall production costs, reducing material consumption. In addition, crushing and grinding operations can also be completed, reducing equipment and minimizing cost investment.
Working principle: Transform the compressed air or overheating steam into a high-speed airflow through the nozzle, when the material is sent to the pulverizing chamber by the feeder, a strong impact and severe friction make the material smash A super fine product.
There are some industries like our food or chemicals, pharmaceutical industries, etc. It is made of material comminution. The coarse crusher is mainly used in the various industries to preprocessing, the main role is also a relatively large number of materials or relatively small particulate materials.
1. First, the gap of the hammer screen can be adjusted: the friction on the screen changes varies from the distance between the material and the screen, and the friction is different. Improve the hammer speed and hammer material efficiency by adjusting the hammer net gap. However, during the production process, the screens they use are different, the raw materials are different, the hammer screening gap needs to be adjusted; in the crusher, the crusher is not very good at the beginning, but after a period of time Work, the particles inside the crusher also changes; in the grinding machine parts, the hammer head is easily worn, and the gap between the hammer head and the screen is increased, and the yield is also declining, it is difficult to maintain.
Of course, in order to test the yield of a crusher, for some of the raw materials, for some screen holes, in order to determine the appropriate hammer sieve gap and suction, the useful life of the screen and the hammer can be obtained in a short time. Very high grinding efficiency data. However, in the production of feed grinding, such specific measurement data, according to the operator's work experience, the technical content of the crusher itself is two things. People with enrichment of experience and labor experience also require higher operating costs. When the hammer is worn, the gap between the hammer and the sieve increases, the friction is reduced, and the abrasive efficiency is lowered.
2.SPIRal Jet Mill for Carbonyl Iron Powder is mainly a renewal of useful use: mainly is mainly rushing the side hair of the screen into the inside, greatly increasing friction, but this method is not used for a long time. After the globi polishing, the efficiency is lowered. It lasts for 30 minutes to 1 hour.
3. Place the friction piece into the Spiral Jet Mill for Carbonyl Iron Powder: The friction piece has the effect of the material ring, but the effect is limited. First, the teeth of the friction plate are in front of the hammer head, the friction surface is small, and the hammer is long-lasting; if the sieve area is too small, the output screen area will be reduced.
For any of the equipment, everyday maintenance can be performed, to ensure that the equipment can run for a long time, so everyday maintenance of Spiral Jet Mill for Carbonyl Iron Powder is critical.
Technical parameters
Finished Product: D50: 3μm
Production capacity: 2-20kg / h
