With the development of society, the application of Disc Jet Mill of Green TEA has become more large.
DISC Jet Mill OF GREEN TEA is carried out from the following aspects:
1. Strengthen basic theoretical research, optimize process flow
Strengthen basic theory research, Guide equipment's independent innovation development, and based on existing equipment, vigorously develop research and optimize process processes. For mass-produced powders, special models can be developed.
2. Improve stand-alone production, reduce unit product energy consumption
With the increasing demand for ultrafine powder products, especially large-scale dosage users increase and product quality The continuous increase in stability requirements has continued to rise for large equipment market demand. Large-scale equipment can more effectively adapt to the development trend of ultrafine powder processing and gradually expand the scale, and there is also many advantages in the energy consumption of unit products, excellent product quality and convenient management.
3. Improve product fineness, enhance the device pulverization limit
The ultrafine powder processing equipment and technical demand for particle diameter at 1 μm or less is getting stronger. Ultrafine powder will be a very important development trend in the field of ultrafine powder in the future. This is mainly due to the current large amount of high-tech and the development and production of new materials. For example, in terms of environmentally friendly building materials, the development of biomedicine materials, etc..
4. Online regulation of product fineness and particle size distribution
This development is a prerequisite requirement for ultrafine crushing lines to achieve intelligent control. Strengthen automatic control and online testing equipment and related software developments and related software in order to improve the level of equipment and reduce energy consumption.
DISC JET MILL OF GREEN TEA Principles: When the compressed gas passes the injection of the injector, the pulverized raw material enters the pulverization room, there are multiple pulverized nozzles in the pulverizing chamber, and the supersonic air flow is injected. , The material is subjected to high speed impact and the material collide with the material, and the grading tube is separated, the coarse particles are separated, and the coarse particle circulation continues to be pulverized, and after the internal closed circuit circulation, the distribution is finally obtained. Uniform ultrafine powder. 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverized, thus achieving uniform particles, particle size distributionSmall product. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA Water Available Feni50Disc Jet Mill of Green TEA Case Sharing: This customer needs a device that can make ultrafine pulverized metal powder. Finally, we purchased our AlPA CSM710-V mechanical grinder.
Technical parameters:
Production capacity: 200-250kg
If there is related requirements, please call us!
