Steam Jet Mill for Chitin

Steam Jet Mill for chitin This product technology has received extensive attention from the industry. Steam Jet Mill for chitin's grinding mechanism is mainly used to determine its wide range of applications, high fine, typical materials: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemistry, medicine. Steam Jet Mill for chitin converts the normal gas from the gas source portion to nitrogen, carbon dioxide, etc., is an inert gas protection device, which is suitable for smashing, grading, and processing of flammable and explosive, oxidative materials.

In terms of airflow milling, it is important to understand its operational rules, which is very important because only familiarize the procedure, can operate correctly.
1. The operation rules of Steam Jet Mill for chitin are as follows: Prepare materials before the start of the production order, prepare materials. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, Steam Jet Mill for chitin starts first starting the motor, controls the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, the main procedures of Steam Jet Mill for chitin are as follows: After the material in the grinding machine housing is completely pulverized, the feed should be stopped and turned off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.


Let's take a look at how to extend the use of Steam Jet Mill for chitin:
1, strictly follow the operating procedures;
2, easy to damage parts Pay attention to time check, replace it in time.

3, the device body has no rotating parts, which is not affected by the lifetime of the bearing. However, due to the difference in powder hardness, the degree of wear is different, especially the wear of the hierarchy knife tip, our companyThe components are made of special materials. The tool tip is used for at least one year. The knife tip wear can affect the grading accuracy, in order to avoid affecting product quality, it is recommended to contact us to replace the knife pointer;

4, recommended service life Filtering device, improve equipment stability, and ensure grading accuracy.
Steam Jet Mill for chitin is a crusher, any mechanical equipment, has certain precautions before use, must check the precautions, so that the damage rate is minimized, then What is the precaution before using a jet ball mill? Here are some introductions.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.

4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.

5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.
ALPA FENI50STEAM JET MILL for Chitin Case Sharing:
A technology company is the main business of metal materials, serving emerging industries, in powder materials and products, magnetic materials and products, welding materials and products, Filter materials and other fields. We continue to innovate around our customers, and work with partners. We are committed to providing competitive solutions and services for advanced metal materials, product programs, and other functional applications to create value for customers. Products have been sold to several countries and regions, and are recognized by many well-known companies and customers at home and abroad.
Case parameters:
Human Yield: 300kg

Shan dong alpa mainly engaged in the production and development and service of Steam Jet Mill for chitin product technology, welcome to consult. With good quality and service, affordable prices, customer-oriented attitudes provide airflow crushing products and services.