With the continuous increase in social needs, Fluidized Bed Jet Mill of Unilast Acetate continues to improve in the use of performance, finished product quality, service life, etc., very good, processed raw materials into micrometers or even nanoscale fine powder, but also A wide range of applications in many areas such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons.
A Fluidized Bed Jet Mill of Unilast Acetate costs, if you want to use Fluidized Bed Jet Mill of Unilast Acetate for a long time, please pay attention to the following:
1. Production In the process, the temperature rise of the bearing should be checked frequently. When the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. 5.fluidized BED JET MILL OF UNILAST ACETATE Host and level score bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a seventeen introduction to the daily maintenance of Fluidized Bed Jet Mill of Unilast Acetate.
Fluidized BED JET MILL OF UNILAST ACETATE Work: The material is uniform, fed into the pulverized port by manuality, in moderation, under the action of the fixed knife and rotary knife, All kinds of straw cut into small segments, then enter the crushing room, under the strong hit of the hammer placed at high speed, the material is rapidly pulverized, due to the large amount of wind pressure in the centrifugal force and the built-in fan, under the negative pressure of the underclocking chamber, was pulverized The material is filled into the lower chamber by the screen hole, and is sent from the wind pressure transfer pipe to the aggregate room.
Fluidized BED Jet Mill of Unilast Acetate Daily Maintenance
2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high. 7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.
AlPa Hard Jet Mill of Unilast Acetate Case Sharing:
A gypsum company is an integrated enterprise, production, sales, export, production, sales, export, production, sales, export, production, sales, export, production, sales The company's products are widely used in building materials, molds, food, medicine, rubber, plastics, coatings and other industries.
The company adopts advanced modern production equipment and leading production technology, natural gypsum, natural plaster powder, desulfurized gypsum powder variety, high grade, quality, and export to all parts of the country, partially exported to Japan, South Korea, South Africa , Egypt and other countries are favored by users.
Case parameters: 4-15UM
Horses Yield: 3-6T
