DISC JET MILL OF LIGNITE

With the continuous advancement of pulverizer technology, DISC Jet Mill OF LIGNITE has been familiar with people. The most popular crushing device is now DISC Jet Mill OF LIGNITE. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.

DISC JET MILL OF LIGNITE has been approved and loved by many industries, but it also has some shortcomings.

During the purchase period, DISC JET MILL OF LIGNITE has high manufacturing cost, energy consumption, and high processing costs; the product particle size is difficult to achieve submicron grade, and the output is greatly reduced during 10 μm, and the processing cost is sharp. Increase.

But the application of Disc Jet Mill of Lignite is really a wide range of:

1, non-metallic mine

Typical materials are: hard kaolin, talc, graphite , Square alphabet, gypsum, diatom, silica bitcite, heavy crystal stone, osaite, aluminum hydroxide, etc., ultra-fine pulverization, and tamperite and other materials such as nanocalbonate, cerium oxide.
2, thermal materials

Typical materials include lactose, wax, resin, fat, bone powder, plants, etc .;

3, hyperparation processing of Chinese herbal medicine and raw materials [123
Typical materials include pollen, hawthorn, mushrooms, pearl powder, stomach medicine, Nimoda, antibiotics, Ganoderma lucidum, five times, He Shouwu, wearing heart, mint, houttuynia, fern root, puerargen, slate blue root, etc.

DISC JET MILL OF LIGNITE principle and features: When compressed gas passes the injection of the injector, the pulverized raw material enters the pulverizer, there are multiple pulverized nozzles per circumscribed, and the supersonic air flow is injected. The material is subjected to high speed impact and the material collide with the material, and the grading tube is separated. The coarse particles are separated, and the coarse particle cycle returns to the pulverized chamber, and the interior closed circuit is pulverized, and finally the distribution is uniform. Ultrafine powder. 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, when pulverizedHigh efficiency, can be pulverized, and can maintain the purity of pulverized product.

Ultra-micro DISC JET MILL OF LIGNITE is correct:

1, the ultrafine pulverizer and power unit should be securely installed. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.

ALPA Avative Glucose Medium DISC JET MIET MILL OF LIGNITE Share: A starch sugar is needed to take a dispelling equipment for water glucose media, and many powder companies have not Find a suitable device. We have found appropriate equipment in our AlPA. Our DISC JET MILL OF LIGNITE can disperse the water glucose medium.

Technical parameters:
Finished particle size: waterless glucose greater than 18 mesh

DISC JET MILL OF LIGNITE for Shan Dong Alpa equipment, has been well received by customers. The reason is that AlPa's Disc Jet Mill of Lignite, grade is accurate, high technology; excellent quality, first-class service. Many customers are also repurchased, and Shandong ALPA DIT MILL OF LIGNITE devices must be your non-bilaterability.