Fluidized Bed Jet Mill OF CREATINE MONHYDRATE has good balanced performance, only need to be produced in a smooth ground, low noise, and avoid dust leakage during the pulverization process, which is favored by the powder industry.
Crushing product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good dispersibility. Since Fluidized Bed Jet Mill of Creatine Monohydrate produces Juromon cooling effects in the crushing process, it is also suitable for low melting point and ultrafine pulverization of thermal materials. Fluidized Bed Jet Mill of Creatine Monohydrate is an important technical parameter and important indicator.
If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated.
When the particle size of the feed is smashed, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.
Fluidized Bed Jet Mill of Creatine Monohydrate can be used in series with a multi-stage classifier and produces a product having multiple particle sizes. The device is easy to disassemble, the inner wall is smooth, and there is no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly. The control system uses program control and easy to operate.
Before the device is turned on, the connection site, sealing and line, etc., all check, there is no problem, can run the powder classifier.
The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order. The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.
AlPa Chondroitin Fluidized Bed Jet Mill of CreaTINE MONHYDRATE share: The company is a professional manufacturer of active biological extracts. It is necessary to meet the ultrafine pulverizer to meet the requirements of GMP.
Technical parameters:
Production capacity: 120kg
If the later stationary unit, precision classifier, jet classifier is intentive, You can contact us directly, product quality is guaranteed, fair price, perfect service, welcome everyone to buy!
