With the development of society, the application of Air Classifier Mill for Nylon Powder has become more large.
Air Classifier Mill for Nylon Powder equipment market is also a market, which controls the performance of the equipment is an important factor in meeting customer needs.
The market sales of one device is also the most cost-effective data, then in this invisible market, which factors are factors in the market sales of Air Classifier Mill For Nylon Powder?
First, the performance of the device. The choice of it is to ask it to bring better production benefits for investment projects, so there is high-yield low energy advantage, and then environmental protection, etc., in addition to this, can reduce artificial dependence Sex, this requires the equipment's intelligence, which is the basic needs of the client for milling equipment.
Second, Air Classifier Mill for Nylon Powder Quality Problem. The quality is mainly due to the life, and if the quality is not good, it is prone to failure in production, which in turn affects the efficiency of the equipment, and will also increase production costs, so manufacturers must ensure that the machine has excellent quality, generally passed Excellent production of materials to complete this need, in addition to this, its welding process should be improved, there is no air hole, etc., otherwise the life of the mill is also difficult to be guaranteed;
Third, manufacturers service. If the manufacturer's attitude is good, the service provided is comparative week, then the customer is easier to buy, because many people now pay attention to the service problem, especially the price of this large equipment is more expensive, if the value is worth it or super For the words, customers will prefer.
Air Classifier Mill for Nylon Powder Working Principle:
The graded air enters the spiral wind chamber, through the guide disk blade flows into the grading wheel in the center direction, and the fine powder satisfying the particle size is separated under grade gravity. Fine powder flows at high speeds and enters the fine powder trapping system from the grading air and then separated from the grading air. The coarse powder falls into the lower part of the graded machine.
Do you know how to correctly use Air Classifier Mill for Nylon Powder? Hope to the followingCan help you.
1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer
(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance
(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions
(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA Battery AIR Classifier Mill for Nylon Powder Case Sharing:
A new material company is a new material high-tech enterprise specializing in the R \u0026 D, production and sales of lithium-ion batteries, and has multiple Engineering Technology Research Center and other research and development platforms, have a variety of invention patents, primary products, three-yuan materials and lithium manganate, etc., and many customers at home and abroad maintain a good cooperative relationship. Form a complete industrial chain of a lithium ion battery positive material, providing customers with high quality products.
Shan Dong Alpa specializes in the production and development and service of Air Classifier Mill for Nylon Powder product technology, welcome to consult. With a perfect quality, excellent service, the most affordable price, the customer's first attitude provides the best eddy current crusher products and services.
