Air Classifier Mill for Silicon Carbon is a very common and commonly used pulverizer. It has a wide range of applications involving many industries.
The main advantage of Air Classifier Mill for Silicon Carbon is to change the linear and surface impact grinding of conventional grinding machines into space 3D impact grinding, and take advantage of high-speed airflow generated by jet in the material flow of the pulverizer. To produce a gas-solid pulverization and grading circulating flow effect of a similar fluidized state, improving the efficiency and energy integrated utilization of impact crushing.
The high-speed airflow generated by the jet impact can be fully utilized to the material flow of the pulling chamber than the other conventional methods. The average energy consumption is reduced by 30% to 40%. Since the impact-crushing area and the gas-solid flow zone are placed in the intermediate space of the pulverized chamber, the impact corrosion of high-speed airflow driven materials is improving, and the jet impact grinding process is improved. The most severe wear problem greatly reduces the possibility of material pollution, using high purity nitrogen, argon and other protective gas as a working medium, prevent oxidation, low-loop operating gas consumption, low cost. During the fully closed-loop operation, no dust is flying, and there is no contamination of the environment, and it is unharitten about the human body.
AIR Classifier Mill for Silicon Carbon Working: Air Flow Crusher and Cyclone Separator Distant Machine Conforms a complete pulverization system, compressed air is filtered and dried, and then through the Lavar nozzle The high-voltage air intersection enters the crushing room at high speed. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classification machine, the fine particles that satisfy the particle size required by the grading wheel with thickness, fine product to collect the fine particles and dust collectors by the grading wheel with the thickness, fine particles of the particle size and the dust collector and dust collectors. And continue to break in the broken area.
High-pressure gas (compressed air, superheated steam or other gas) injected from the pulverization chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber were subjected to tangential shock of the air flow injected from different angles. The solid particles collide with each other and friction in the mixed airflow. Since the temperature generated during the pulverization is small, it is conducive to the low melting point crushing material. When toxic, flammable or radioactive substances are crushed, superheated steam is usually used to prevent outwardly spread.
This is because all materials can be precipitated when steam is condensed. The gas flow pulverizer utilizes the material to achieve huge kinetic energy under the action of the high-speed airflow, causing the high-speed collision and the severe friction between the particles, while the high-speed airflow generates shear effects, thereby achieving the purpose of pulverization.
AIR Classifier Mill for SilicWhen there is oil in the on Carbon box, it is necessary to clean up in time
Air Classifier Mill for Silicon Carbon has been converted into an industrial manufacturing field. Sometimes Air Classifier Mill for Silicon Carbon will also be damaged. Let's take a look at how to check the repair equipment with Xiaobian.
Daily Maintenance Air Classifier Mill for Silicon Carbon To check the power outlet, plug, the power cord is no oxygen, the break, if you do not have a power test machine, when the motor is not rotated, When the handlight movement is rotatable, it can be concluded that there is a capacity failure in the two start capacitances of the machine. If you can make a discharge spark and a very frightening, the capacitor can be used; if the sparks and sound are weak, the capacity of the capacitance has decreased, and the new or add a small capacitor. The airflow pulverizer does not use this method if the capacitor has damaged the short circuit, and it must be replaced with the same size new product.
In addition to the AIR Classifier Mill for Silicon Carbon, there is another type of rod grinding high speed pulverizer. The quality of this crusher is very good, and daily maintenance is more important. Below is this Maintenance focus of the gas current pulverizer. Check if the lubrication of the bearing is good to check if all fasteners are tight. Check if the drive belt is installed correctly and the situation is good. Check if the protective device is good. If the protective device is found, it should be excluded in time. Check that there is no material or other debris in the damage chamber, if it is sometimes cleaned. Check if the hydraulic starting machine head or the starting roof rod is returned, the adjustment space is installed correctly and compact.
The above is the knowledge of the daily maintenance and maintenance of the AIR Classifier Mill for Silicon Carbon manufacturers.
ALPA Battery AIR Classifier Mill for Silicon Carbon Case Sharing:
Case parameters
Product particle size: 2-45UM
Horses Yield: 200-300KG
For more consultation, please continue to pay attention to us, or inquire.
