With the development of society and life, the demand for Steam Jet Mill for Lithium Iron is getting bigger and higher, and the requirements for fineness, purity and pass rate are increasing. In the current market, there is a great development space.
High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, At the powerful centrifugal force of the rotational speed of Steam Jet Mill for Lithium Iron, the thickness of the material is separated from separation, the fractional wheel of fine particles into the cyclone separator and dust removal, continues to be pulverized. The classifier produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the grading requirements of the material. The grading machine has a greater processing amount, energy saving, simple operation, and low maintenance cost.
Steam Jet Mill for Lithium Iron Main Performance Features:
1 . It can be used in series with multi-stage classifiers and produces a product having multiple particles.
2, the device is easy to disassemble, the inner wall is smooth, no dead angle. The entire system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.
3, the control system is controlled by program control and easy to operate.
Ultraflight Steam Jet Mill for Lithium Iron is an ultra-smuggled device that uses air separation, heavy polishing, and shear. It is widely used in various industries. Let's take a brief introduction to its daily maintenance content.
2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If there is a rotating gearThe impact sound must be closed in time and remove the fault.
ALPA Carbon Steam Jet Mill for Lithium Iron Case Sharing: The company produces supermilt super fine pulverization in the production of static pressure graphite.After multi-party investigation and experiment, finally selected our AlPA as a cooperative customer, we provide the Steam Jet Mill for Lithium Iron provided by it to meet its needs of carbon pulverity, particle size, yield, and other needs.
Technical parameters:
Production capacity: 800-1000kg
As a three-year powder engineering equipment manufacturer, Shandong AlPa has domesticMore than 3,000 customers, rich research and development production experience has always led the front end of the industry, so before consulting, you need to provide the characteristics of the crushing material, the granular parameters, production and production production range, purity requirements, specific process requirements (anti-high temperature,Explosion-proof, anti-dust pollution, etc.), professional engineers provide appropriate equipment models or system solutions according to this information.Welcome to inquire.
