Steam Jet Mill for Cephalosporins is a crushing equipment commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.
Which factors affect the performance parameters used by Steam Jet Mill for Cephalins?
The following is a detailed description:
1. Feeding particle size control
Most Steam Jet Mill for Cephalins has a certain upper limit requirement for the feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium
Currently, the working medium of Steam Jet Mill for Cephalosporins is mainly compressed, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed
Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Particle size
Steam Jet Mill for Cephalins During the pulverization process, as the material particle size is reduced, the crystallization and intensity of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached. At this time, the material specific surface area is increased, and the surface activity of particles increases, granules.Inter-agglomeration and grinding are in a dynamic balance, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.
Characteristics of Steam Jet Mill for CephalOsporins
1, suitable for ultrafine pulverization of dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.
2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.
3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.
4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.
Steam Jet Mill for Cephalosporins is necessary to clean the air pulverizer for a long time. After cleaning the pulverizer, all machines must be removed. Detaching skill is also very good. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is removed, four screws on the base can be removed, and then remove the hopper. When the screen is removed, the airflow pulverizer door can be opened directly and the screen can be removed at the end. After the mobile gear is removed, the fastening nut is released first, and then the live teeth are separated from the spindle. Then move the mobile gear and put it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the gas flow crusher. Do not cause any damage to the components of the machine itself.
ALPA Seaweed Feed Steam Jet Mill for CephalinsPorins Sharing: The company is a seafood enterprise in Yantai. It is found to be smashing algae during breeding. After crushing, it can be used as a feed for sea cucumber, saving feed purchases. cost. By comparing a long-term use of a Steam Jet Mill for Cephalins, you may save the cost of the production line for several years. The company purchased our ALPA Steam Jet Mill for Cephalosporins.
Technical parameters:
finished particle size: D90: 400 目
Today, I will introduce you here, I want to know more information, please Continue to pay attention to our website.
