Disc Jet Mill of Titanium is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.
Disc Jet Mill of Titanium work Temperature is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.
In the conventional dispersion pulverization process, it is difficult to overcome the phenomenon of heating, viscosity. The machine uses a swirling high-speed rotational movement to produce a strong airflow in the mill. The material enters the crushing room under the negative pressure of the feed port. The vortex vibration generated by the strong gas flow between the blade and the module is generated by impact, shearing and grinding. The heat of the crushing room is taken away by the airflow, and the heat generated during the crushing process does not accumulate. The finished powder from the screen stream, improves the weight of the mill can be adjusted by the screen production efficiency, and the fineness is uniform.
In general, there are some sounds in the operation. DISC JET MILL OF TITANIUM will definitely have broken sounds during crushing raw materials, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.
1. Add a lubricating oil on the rotating part, and adjust the bearing if the bearing and the shaft are; if the bearing wear is resistant, the bearing will be replaced.
2. There will be noise during the pulverization process. The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.
3. Install the muffler on the fireplace of the pulverizer.
4. Damping equipment, such as using damping boards.
ALPA Battery Disc Jet Mill of Titanium Case Sharing:
A new material company is specially engaged in the research and development, production and sales of lithium-ion battery positive materials, high-tech enterprises, built A number of research and development platforms such as multiple engineering and technology research centers have a variety of invention patents, primary products, three-yuan materials and lithium manganate, etc., and many customers at home and abroad maintain a good cooperative relationship. Form a complete industrial chain of a lithium ion battery positive material, providing customers with high quality products.
Shan dong alpA is committed to DISC JET MILL OF TITANIUM, has a mature process process, has a high-energy technology research and development team, specializing in crusher research and development, survive by quality, welcome everyone to come to consult.
