In this economically flourished area, many people know that Fluidized Bed Jet Mill of Corn on The Cob, crusher technology is leading in the same industry.
In the production process of crushing using Fluidized Bed Jet Mill of Corn on the Cob, the ultrasonic air flow generated by the device can constantly collide with the material, and this supersonic airflow is also It can produce a good impact on raw materials, and then the material can also achieve a good crushing effect with the inner wall of the equipment.
In the conventional dispersion pulverization process, it is difficult to overcome the phenomenon of heating, viscosity. The machine uses a swirling high-speed rotational movement to produce a strong airflow in the mill. The material enters the crushing room under the negative pressure of the feed port. The vortex vibration generated by the strong gas flow between the blade and the module is generated by impact, shearing and grinding. The heat of the crushing room is taken away by the airflow, and the heat generated during the crushing process does not accumulate. The finished powder from the screen stream, improves the weight of the mill can be adjusted by the screen production efficiency, and the fineness is uniform.
Fluidized BED JET MILL OF CORN ON The COB Vibration Causes and Solutions can be carried out from the following aspects:
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.
The above is Fluidized Bed JET Mill of Corn on The Cob Related Content, provided by Shan Dong Alpa.The company has consistently follows the management of the standard, puts the quality in the first production and service policy, providing customers with confidence and a weighing crusher product and services.
