For RTM Turbo Mill blocking troubleshooting, small clamps talk about their opinions, I hope to have some reference roles. What kind of RTM Turbo Mill is a trusted product or service, and many people have confused massive RTM Turbo Mill.
Crusher clog is the most common fault of mechanical. It may be one of the most common failures in mechanical design, but because improper operation can cause many faults.
(1) The feeding speed is too fast, the load is increased, causing clogging. In the aquaculture process, pay attention to the deflection angle of the current table pointer at any time. If the rated current is exceeded, the motor overload and long-term overload will burn the motor. This situation should be reduced or closed immediately, but it can also be changed by increasing the feed speed to control the feed speed. Because the energy rolling mill is fast, the load is large, and the load fluctuates. Therefore, the current of the rolling mill is generally controlled around 85% of the rated current.
(2) The incisor of the discharge tube is different or the interference is too fast, and the universal crusher is blocked, and the conveying equipment does not match, resulting in weakening or calm of the drainage pipe. In order to find a fault, we must first clarify the export transport equipment, not change, adjust the amount of feed, and the normal operation of the equipment.
(3) The water content, aging, screening, crushing and sealing material of the hammer hammer are too high, and the general grinding will be blocked. There is a need to regularly update the working state of the hammer aging and the serious aging, and check the screen regularly. Improve the production efficiency of universal grinding machines, improve the reliability of non-clogging and grinding.
Welcome to choose Shandong Alpa Powder Technology Co., Ltd., the company is committed to RTM Turbo Mill products and services, our company provides RTM Turbo Mill, the price is low, if you are interested in our RTM Turbo Mill, please feel free to contact US.
