A set of jets and cyclone separators, dust collectors, air blowers, and crushing systems.
The dry compressed air is sprayed into the pulverizing chamber through the high speed sloring nozzle, and the cross-repeated collision, friction, shear and crushing, crushing material and the rising air flow exercise, and the coincidence.
Under the action of high-speed rotating classification turbine, under the action of different thicknesses, the material of different thicknesses meets the size of the particles, and collects the cyclonic separator and the dust collector to reduce the debris from the crude particulate crush region. Preparation of Jet Mill equipment should be based on the usage, and some drawings, etc., the determination process, etc. can be correct.
(2) In crushing equipment, sufficient space should be left in order to be able to feed and maintain, and so on.
(3) The equipment basis should be strong and must have sufficient strength, so it is possible to successfully install the host and motor.
The abrasive high-pressure gas-containing outer peripheral gas flows into the airflow distribution station of the crushing room, the lavar nozzle accelerates the air entering the ultrasonic air flow into the crushing chamber, and the material Bible venturi nozzle is accelerated.
Because the ruvel nozzle and the crushing cavity are installed as an acute angle, the high-speed jet crushing cavity drive material makes the surface between the particles, the particles and the particles and the fixed target partition, collision, friction, and pulverization.
