Jet Mill jet and cyclone separator, dust collector, air blower form a set of crushing systems.
By filtration of dried compressed air, through the La Anvali high-speed nozzle enters the pulverizer, the material of the intersection of the high pressure airflow is repeatedly collided, friction, shear pulverization, crushing material and the rising airflow motion score the blower, high speed rotation Under the role of the sorting of the turbine, the thickness of the individual material, the size of the required particles, and the cleaning area of the crude particulate zone is continued from the crude particulate crushing region by classification into the cyclone and the dust collector.
The jet is a superfine mill using a high-speed airflow to achieve a dry material, which is made of a rotor, a spiral feeder, a spiral feeder, and the material of the pulverizing nozzle, the hierarchy and other components.
The air pressure is high-speed enters the pulverizing chamber. Special configuration of supersonic nozzle injection, material ultrasonic nozzle jet speed, and nozzle repeated impact, collision, crushing equipment. Work, pay attention to the bearing temperature does not exceed 55 ° C, whether there is an overheating phenomenon, should immediately stop checking to avoid burning bearings, spindles, etc.
The polymeric material package should be cleaned in time, otherwise the production efficiency will be affected. Adjust, replace the hammer or a triangle, you should open the housing cleaning chamber wood, note: The power must be disconnected to ensure safety.
