Today, talk about Jet Mill principle, below Shandong AlPa Powder Technology Co., Ltd., introduces you to the principle of Jet Mill.
The principles of airflow classifiers, as well as their scope of use, in the previous article "Summary of airflow grading machine principles, operation and maintenance", and other classified machines, And also explained in detail, so for these contents, small compilation is not repeated. However, about its operating procedures, there is no explanation in front, so the following small knits take time and effort to explain this knowledge point, so that everyone knows how to operate such machine equipment correctly.
The operation procedures of the airflow classifier include:
(1) In the airflow classifier, any debris or foreign matter is not allowed, as this will damage the device. .
(2) The device is inspected before the bearing and the lubrication of the bearing and the reducer is good, and whether there is a problem if there is a problem.(3) Check if the amount of oil in the gearbox is sufficient, and whether the oil supply of the oil supply is normal.
(4) Whether the fasteners such as screws are fastened, whether the blade is serious, and it needs to be replaced.
(5) Whether the electrical switch and the limit switch is intact, it can work properly, and whether the shroud at the coupling, belt and gear is intact, whether the electrical facilities are sensitive and reliable.(6) When the airflow classifier works, the operator cannot leave, more unable to rotate the part, or move the protective cover, which is very dangerous.
(7) When using the classifier, it is necessary to pay attention to it is not an abnormal phenomenon. Once a fault occurs, the device should be cut off immediately, and then processed by professional maintenance personnel, it is not possible to avoid damage to the equipment.Welcome to Shandong AlPa Powder Technology Co., Ltd., above about Jet Mill principle, is Jet MillShanDong Alpa Powder Technology Co., Ltd., one of the surcharges.
