After separation, the particles that meet the requirements are in the cyclone separator or the dust collector, and then collected, and the particles do not meet the required particles are then separated until it meets the requirements. In recent years, with the continuous improvement of domestic industrial manufacturing levels, there is significant progress in the production technology of Jet Mill and other equipment, basically be the leading market leading, industry development prospects are optimistic.
How to do a good job in such cases when the spiral conveyor is delivered to the powder.
The inner settlement unit, the product particle size D97: 8-150 microns are adjustable, the particle shape is good, the particle size distribution is narrow. Guangdong Electric Power Bureau Bureau of Power Plant has only 63% of the dust mass concentration, and there is a certain gap from 90% of the target. The original mother's all-time farmers, hosted a state-owned back to the bodies, the back of the family, the end of the business, the skill, the narrow companion.
Therefore, when these two small faults appear, it can be processed according to the method of Xiaobian, which is neither delayed, and can save the cost of repair. It is strictly forbidden to open the upper cover and extends into the pulverized cavity by hand. In summary, Jet Mill's attention specification is mainly noted from the pre-boot check, boot and shutdown. Of course, the situation of each part is also cured, and the dust hazard of the power plant is greatly reduced. Moreover, the wear of this crusher is extremely small, allowing the product from pollution.
Ultra-micro Jet Mill Working Principle:
The material first is brought into a mechanical pulverized region by the charged air, and the material is cut in the pulverized zone, and the crushing material is different from the size of the particles.
The gravity and centrifugal force are also different, and the fine powder particles are mounted in the air flow injected from the nozzle at the bottom of the pulverizer into the airflow zone of the upper portion of the mechanical pulverization region, and the material is rotated in the pulverized area. Mutual collision, friction ultimately achieves ultrafine pulverized purpose.
